What's the right amount of swap space for a modern Linux system?

What's the right amount of swap space for a modern Linux system?

Complete our survey and voice your opinion on how much swap space to allocate.

Magnifying glass on code
Image credits : 
Lewis Cowles, CC BY-SA 4.0
x

Subscribe now

Get the highlights in your inbox every week.

What's the right amount of swap space?

Swap space is one of those things that everyone seems to have an idea about, and I am no exception. All my sysadmin friends have their opinions, and most distributions make recommendations too.

Many years ago, the rule of thumb for the amount of swap space that should be allocated was 2X the amount of RAM installed in the computer. Of course that was when a typical computer's RAM was measured in KB or MB. So if a computer had 64KB of RAM, a swap partition of 128KB would be an optimum size.

This took into account the fact that RAM memory sizes were typically quite small, and allocating more than 2X RAM for swap space did not improve performance. With more than twice RAM for swap, most systems spent more time thrashing than performing useful work.

RAM memory has become quite inexpensive and many computers now have RAM in the tens of gigabytes. Most of my newer computers have at least 4GB or 8GB of RAM, two have 32GB, and my main workstation has 64GB. When dealing with computers with huge amounts of RAM, the limiting performance factor for swap space is far lower than the 2X multiplier. As a consequence, recommended swap space is considered a function of system memory workload, not system memory.

Table 1 provides the Fedora Project's recommended size for a swap partition, depending on the amount of RAM in your system and whether you want enough memory for your system to hibernate. To allow for hibernation, you need to edit the swap space in the custom partitioning stage. The "recommended" swap partition size is established automatically during a default installation, but I usually find it's either too large or too small for my needs.

The Fedora 28 Installation Guide defines current thinking about swap space allocation. Note that other versions of Fedora and other Linux distributions may differ slightly, but this is the same table Red Hat Enterprise Linux uses for its recommendations. These recommendations have not changed since Fedora 19.

Amount of RAM installed in system Recommended swap space Recommended swap space with hibernation
≤ 2GB 2X RAM 3X RAM
2GB – 8GB = RAM 2X RAM
8GB – 64GB 4G to 0.5X RAM 1.5X RAM
>64GB Minimum 4GB Hibernation not recommended

Table 1: Recommended system swap space in Fedora 28's documentation.

Table 2 contains my recommendations based on my experiences in multiple environments over the years.

Amount of RAM installed in system Recommended swap space
≤ 2GB 2X RAM
2GB – 8GB = RAM
> 8GB 8GB

Table 2: My recommended system swap space.

It's possible that neither of these tables will work for your environment, but they will give you a place to start. The main consideration is that as the amount of RAM increases, adding more swap space simply leads to thrashing well before the swap space comes close to being filled. If you have too little virtual memory, you should add more RAM, if possible, rather than more swap space.

In order to test the Fedora (and RHEL) swap space recommendations, I used its recommendation of 0.5*RAM on my two largest systems (the ones with 32GB and 64GB of RAM). Even when running four or five VMs, multiple documents in LibreOffice, Thunderbird, the Chrome web browser, several terminal emulator sessions, the Xfe file manager, and a number of other background applications, the only time I see any use of swap is during backups I have scheduled for every morning at about 2am. Even then, swap usage is no more than 16MB—yes megabytes. These results are for my system with my loads and do not necessarily apply to your real-world environment.

I recently had a conversation about swap space with some of the other Community Moderators here at Opensource.com, and Chris Short, one of my friends in that illustrious and talented group, pointed me to an old article where he recommended using 1GB for swap space. This article was written in 2003, and he told me later that he now recommends zero swap space.

So, we wondered, what you think? What do you recommend or use on your systems for swap space?

Topics

About the author

David Both - David Both is a Linux and Open Source advocate who resides in Raleigh, North Carolina. He has been in the IT industry for over forty years and taught OS/2 for IBM where he worked for over 20 years. While at IBM, he wrote the first training course for the original IBM PC in 1981. He has taught RHCE classes for Red Hat and has worked at MCI Worldcom, Cisco, and the State of North Carolina. He has been working with Linux and Open Source Software for almost 20 years. David has written articles for...