This article is excerpted from chapter 4 of Linux in Action, published by Manning.
Whether you're trying to rescue data from a dying storage drive, backing up archives to remote storage, or making a perfect copy of an active partition somewhere else, you'll need to know how to safely and reliably copy drives and filesystems. Fortunately,
dd is a simple and powerful image-copying tool that's been around, well, pretty much forever. And in all that time, nothing's come along that does the job better.
Making perfect copies of drives and partitions
There's all kinds of stuff you can do with
dd if you research hard enough, but where it shines is in the ways it lets you play with partitions. You can, of course, use
tar or even
scp to replicate entire filesystems by copying the files from one computer and then pasting them as-is on top of a fresh Linux install on another computer. But, because those filesystem archives aren't complete images, they'll require a running host OS at both ends to serve as a base.
dd, on the other hand, can make perfect byte-for-byte images of, well, just about anything digital. But before you start flinging partitions from one end of the earth to the other, I should mention that there's some truth to that old Unix admin joke: "dd stands for disk destroyer." If you type even one wrong character in a
dd command, you can instantly and permanently wipe out an entire drive of valuable data. And yes, spelling counts.
Remember: Before pressing that Enter key to invoke
dd, pause and think very carefully!
Basic dd operations
Now that you've been suitably warned, we'll start with something straightforward. Suppose you want to create an exact image of an entire disk of data that's been designated as
sda. You've plugged in an empty drive (ideally having the same capacity as your
sda system). The syntax is simple:
if= defines the source drive and
of= defines the file or location where you want your data saved:
# dd if=/dev/sda of=/dev/sdb
The next example will create an .img archive of the
sda drive and save it to the home directory of your user account:
# dd if=/dev/sda of=/home/username/sdadisk.img
Those commands created images of entire drives. You could also focus on a single partition from a drive. The next example does that and also uses
bs to set the number of bytes to copy at a single time (4,096, in this case). Playing with the
bs value can have an impact on the overall speed of a
dd operation, although the ideal setting will depend on your hardware profile and other considerations.
# dd if=/dev/sda2 of=/home/username/partition2.img bs=4096
Restoring is simple: Effectively, you reverse the values of
of. In this case,
if= takes the image you want to restore, and
of= takes the target drive to which you want to write the image:
# dd if=sdadisk.img of=/dev/sdb
You can also perform both the create and copy operations in one command. This example, for instance, will create a compressed image of a remote drive using SSH and save the resulting archive to your local machine:
# ssh email@example.com "dd if=/dev/sda | gzip -1 -" | dd of=backup.gz
You should always test your archives to confirm they're working. If it's a boot drive you've created, stick it into a computer and see if it launches as expected. If it's a normal data partition, mount it to make sure the files both exist and are appropriately accessible.
Wiping disks with dd
Years ago, I had a friend who was responsible for security at his government's overseas embassies. He once told me that each embassy under his watch was provided with an official government-issue hammer. Why? In case the facility was ever at risk of being overrun by unfriendlies, the hammer was to be used to destroy all their hard drives.
What's that? Why not just delete the data? You're kidding, right? Everyone knows that deleting files containing sensitive data from storage devices doesn't actually remove the data. Given enough time and motivation, nearly anything can be retrieved from virtually any digital media, with the possible exception of the ones that have been well and properly hammered.
You can, however, use
dd to make it a whole lot more difficult for the bad guys to get at your old data. This command will spend some time writing millions and millions of zeros over every nook and cranny of the
# dd if=/dev/zero of=/dev/sda1
But it gets better. Using
urandom file as your source, you can write over a disk with random characters:
# dd if=/dev/urandom of=/dev/sda1
Monitoring dd operations
Since disk or partition archiving can take a very long time, you might want to add a progress monitor to your command. Install Pipe Viewer (
sudo apt install pv on Ubuntu) and insert it into
pv, that last command might look something like this:
# dd if=/dev/urandom | pv | dd of=/dev/sda1
4,14MB 0:00:05 [ 98kB/s] [ <=> ]
Putting off backups and disk management? With dd, you aren't left with too many excuses. It's really not difficult, but be careful. Good luck!