How to configure an Apache web server

Learn to host your own website with Apache, a solid, well-known, and easy-to-configure web server.
435 readers like this.
Image of spider web

You as a Machine. Modified by Rikki Endsley. CC BY-SA 2.0.

I have hosted my own websites for many years now. Since switching from OS/2 to Linux more than 20 years ago, I have used Apache as my server software. Apache is solid, well-known, and quite easy to configure for a basic installation. It is not really that much more difficult to configure for a more complex setup, such as multiple websites.

Installation and configuration of the Apache web server must be performed as root. Configuring the firewall also needs to be performed as root. Using a browser to view the results of this work should be done as a non-root user. (I use the user student on my virtual host.)


Note: This article has been updated using Fedora 33 with Apache 2.4.46. If you use a different distribution or a different release of Fedora, your commands and the locations and content of the configuration files may be different. However, the configuration lines you need to modify are the same regardless of distribution.

The Apache web server is easy to install. With one command, you can install it and all necessary dependencies:

$ dnf install httpd

All the configuration files for Apache are located in /etc/httpd/conf and /etc/httpd/conf.d. The data for websites you'll run with Apache is located in /var/www by default, but you can change that if you want.


The primary Apache configuration file is /etc/httpd/conf/httpd.conf. It contains a lot of configuration statements that don't need to be changed for a basic installation. In fact, only a few changes must be made to this file to get a basic website up and running. The file is very large so, rather than clutter this article with a lot of unnecessary stuff, I will show only those directives that you need to change.

First, take a bit of time and browse through the httpd.conf file to familiarize yourself with it. One of the things I like about Red Hat versions of most configuration files is the number of comments that describe the various sections and configuration directives in the files. The httpd.conf file is no exception, as it is quite well commented. Use these comments to understand what the file is configuring.

The first item to change is the Listen statement, which defines the IP address and port on which Apache is to listen for page requests. Right now, you just need to make this website available to the local machine, so use the localhost address. The line should look like this when you finish:


With this directive set to the IP address of the localhost, Apache will listen only for connections from the local host. If you want the web server to listen for connections from remote hosts, you would use the host's external IP address.

The DocumentRoot directive specifies the location of the HTML files that make up the pages of the website. That line does not need to be changed because it already points to the standard location. The line should look like this:

DocumentRoot "/var/www/html"

The Apache installation RPM creates the /var/www directory tree. If you wanted to change the location where the website files are stored, this configuration item is used to do that. For example, you might want to use a different name for the www subdirectory to make the identification of the website more explicit. That might look like this:

DocumentRoot "/var/mywebsite/html"

These are the only Apache configuration changes needed to create a simple website. For this little exercise, only one change was made to the httpd.conf file—the Listen directive. Everything else is already configured to produce a working web server.

One other change is needed, however: opening port 80 in our firewall. I use iptables as my firewall, so I change /etc/sysconfig/iptables to add a statement that allows HTTP protocol. The entire file looks like this:

# sample configuration for iptables service
# you can edit this manually or use system-config-firewall
# please do not ask us to add additional ports/services to this default configuration
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited

The line I added is the third from the bottom, which allows incoming traffic on port 80. Now I reload the altered iptables configuration.

[root@testvm1 ~]# cd /etc/sysconfig/ ; iptables-restore iptables

Create the index.html file

The index.html file is the default file a web server will serve up when you access the website using just the domain name and not a specific HTML file name. In the /var/www/html directory, create a file with the name index.html. Add the content Hello World. You do not need to add any HTML markup to make this work. The sole job of the web server is to serve up a stream of text data, and the server has no idea what the date is or how to render it. It simply transmits the data stream to the requesting host.

After saving the file, set the ownership to apache.apache.

[root@testvm1 html]# chown apache.apache index.html

Start Apache

Apache is very easy to start. Current versions of Fedora use systemd. Run the following commands to start it and then to check the status of the server:

[root@testvm1 ~]# systemctl start httpd
[root@testvm1 ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor preset: disabled)
   Active: active (running) since Thu 2018-02-08 13:18:54 EST; 5s ago
     Docs: man:httpd.service(8)
 Main PID: 27107 (httpd)
   Status: "Processing requests..."
    Tasks: 213 (limit: 4915)
   CGroup: /system.slice/httpd.service
           ├─27107 /usr/sbin/httpd -DFOREGROUND
           ├─27108 /usr/sbin/httpd -DFOREGROUND
           ├─27109 /usr/sbin/httpd -DFOREGROUND
           ├─27110 /usr/sbin/httpd -DFOREGROUND
           └─27111 /usr/sbin/httpd -DFOREGROUND

Feb 08 13:18:54 testvm1 systemd[1]: Starting The Apache HTTP Server...
Feb 08 13:18:54 testvm1 systemd[1]: Started The Apache HTTP Server.

The commands may be different on your server. On Linux systems that use SystemV start scripts, the commands would be:

[root@testvm1 ~]# service httpd start
Starting httpd: [Fri Feb 09 08:18:07 2018]          [  OK  ]
[root@testvm1 ~]# service httpd status
httpd (pid  14649) is running...

If you have a web browser like Firefox or Chrome on your host, you can use the URL localhost on the URL line of the browser to display your web page, simple as it is. You could also use a text mode web browser like Lynx to view the web page. First, install Lynx (if it is not already installed).

[root@testvm1 ~]# dnf -y install lynx

Then use the following command to display the web page.

[root@testvm1 ~]# lynx localhost

The result looks like this in my terminal session. I have deleted a lot of the empty space on the page.

  Hello World


Commands: Use arrow keys to move, '?' for help, 'q' to quit, '<-' to go back.
  Arrow keys: Up and Down to move.  Right to follow a link; Left to go back.
 H)elp O)ptions P)rint G)o M)ain screen Q)uit /=search [delete]=history list

Next, edit your index.html file and add a bit of HTML markup so it looks like this:

<h1>Hello World</h1>

Now refresh the browser. For Lynx, use the key combination Ctrl+R. The results look just a bit different. The text is in color, which is how Lynx displays headings if your terminal supports color, and it is now centered. In a GUI browser the text would be in a large font.

                                   Hello World


Commands: Use arrow keys to move, '?' for help, 'q' to quit, '<-' to go back.
  Arrow keys: Up and Down to move.  Right to follow a link; Left to go back.
 H)elp O)ptions P)rint G)o M)ain screen Q)uit /=search [delete]=history list

Parting thoughts

As you can see from this little exercise, it is easy to set up an Apache web server. The specifics will vary depending upon your distribution and the version of Apache supplied by that distribution. In my environment, this was a pretty trivial exercise.

But there is more because Apache is very flexible and powerful. Next month I will discuss hosting multiple websites using a single instance of Apache.

This article was originally published in 2018 and has been updated by the editor.

David Both
David Both is an Open Source Software and GNU/Linux advocate, trainer, writer, and speaker. He has been working with Linux and Open Source Software since 1996 and with computers since 1969. He is a strong proponent of and evangelist for the "Linux Philosophy for System Administrators."


At one time I set up a web server and allowed remote connections. If you do this, you have to make sure you learn about deny and allow setup for connections. It was surprising on looking at connection logs how quickly (like immediately) you become a target for people trying to log in to your site with privileges.

Thanks for the article, this is a good refresher :)

Creative Commons LicenseThis work is licensed under a Creative Commons Attribution-Share Alike 4.0 International License.