Using the force at the Linux command line

Like the Jedi Force, -f is powerful, potentially destructive, and very helpful when you know how to use it.
121 readers like this.
WOOTConf 2017: Lockpicking, Willie Nelson developers, and more

Peter van der Sluijs, Wikimedia Commons, CC BY-SA 2.0

Sometime in recent history, sci-fi nerds began an annual celebration of everything Star Wars on May the 4th, a pun on the Jedi blessing, "May the Force be with you." Although most Linux users are probably not Jedi, they still have ways to use the force. Of course, the movie might not have been quite as exciting if Yoda simply told Luke to type man X-Wing fighter or man force. Or if he'd said, "RTFM" (Read the Force Manual, of course).

Many Linux commands have an -f option, which stands for, you guessed it, force! Sometimes when you execute a command, it fails or prompts you for additional input. This may be an effort to protect the files you are trying to change or inform the user that a device is busy or a file already exists.

If you don't want to be bothered by prompts or don't care about errors, use the force!

Be aware that using a command's force option to override these protections is, generally, destructive. Therefore, the user needs to pay close attention and be sure that they know what they are doing. Using the force can have consequences!

Following are four Linux commands with a force option and a brief description of how and why you might want to use it.

cp

The cp command is short for copy—it's used to copy (or duplicate) a file or directory. The man page describes the force option for cp as:

-f, --force
       if an existing destination file cannot be opened, remove it
       and try again

This example is for when you are working with read-only files:

[alan@workstation ~]$ ls -l
total 8
-rw-rw---- 1 alan alan 13 May  1 12:24 Hoth
-r--r----- 1 alan alan 14 May  1 12:23 Naboo
[alan@workstation ~]$ cat Hoth Naboo 
Icy Planet

Green Planet

If you want to copy a file called Hoth to Naboo, the cp command will not allow it since Naboo is read-only:

[alan@workstation ~]$ cp Hoth Naboo 
cp: cannot create regular file 'Naboo': Permission denied

But by using the force, cp will not prompt. The contents and permissions of Hoth will immediately be copied to Naboo:

[alan@workstation ~]$ cp -f Hoth Naboo 
[alan@workstation ~]$ cat Hoth Naboo 
Icy Planet

Icy Planet

[alan@workstation ~]$ ls -l
total 8
-rw-rw---- 1 alan alan 12 May  1 12:32 Hoth
-rw-rw---- 1 alan alan 12 May  1 12:38 Naboo

Oh no! I hope they have winter gear on Naboo.

ln

The ln command is used to make links between files. The man page describes the force option for ln as:

-f, --force
       remove existing destination files

Suppose Princess Leia is maintaining a Java application server and she has a directory where all Java versions are stored. Here is an example:

leia@workstation:/usr/lib/java$ ls -lt
total 28
lrwxrwxrwx 1 leia leia   12 Mar  5  2018 jdk -> jdk1.8.0_162
drwxr-xr-x 8 leia leia 4096 Mar  5  2018 jdk1.8.0_162
drwxr-xr-x 8 leia leia 4096 Aug 28  2017 jdk1.8.0_144

As you can see, there are several versions of the Java Development Kit (JDK) and a symbolic link pointing to the latest one. She uses a script with the following commands to install new JDK versions. However, it won't work without a force option or unless the root user runs it:

tar xvzmf jdk1.8.0_181.tar.gz -C jdk1.8.0_181/
ln -vs jdk1.8.0_181 jdk

The tar command will extract the .gz file to the specified directory, but the ln command will fail to upgrade the link because one already exists. The result will be that the link no longer points to the latest JDK:

leia@workstation:/usr/lib/java$ ln -vs jdk1.8.0_181 jdk
ln: failed to create symbolic link 'jdk/jdk1.8.0_181': File exists
leia@workstation:/usr/lib/java$ ls -lt
total 28
drwxr-x--- 2 leia leia 4096 May  1 15:44 jdk1.8.0_181
lrwxrwxrwx 1 leia leia   12 Mar  5  2018 jdk -> jdk1.8.0_162
drwxr-xr-x 8 leia leia 4096 Mar  5  2018 jdk1.8.0_162
drwxr-xr-x 8 leia leia 4096 Aug 28  2017 jdk1.8.0_144

She can force ln to update the link correctly by passing the force option and one other, -n. The -n is needed because the link points to a directory. Now, the link again points to the latest JDK:

leia@workstation:/usr/lib/java$ ln -vsnf jdk1.8.0_181 jdk
'jdk' -> 'jdk1.8.0_181'
leia@workstation:/usr/lib/java$ ls -lt
total 28
lrwxrwxrwx 1 leia leia   12 May  1 16:13 jdk -> jdk1.8.0_181
drwxr-x--- 2 leia leia 4096 May  1 15:44 jdk1.8.0_181
drwxr-xr-x 8 leia leia 4096 Mar  5  2018 jdk1.8.0_162
drwxr-xr-x 8 leia leia 4096 Aug 28  2017 jdk1.8.0_144

A Java application can be configured to find the JDK with the path /usr/lib/java/jdk instead of having to change it every time Java is updated.

rm

The rm command is short for "remove" (which we often call delete, since some other operating systems have a del command for this action). The man page describes the force option for rm as:

-f, --force
       ignore nonexistent files and arguments, never prompt

If you try to delete a read-only file, you will be prompted by rm:

[alan@workstation ~]$ ls -l
total 4
-r--r----- 1 alan alan 16 May  1 11:38 B-wing
[alan@workstation ~]$ rm B-wing 
rm: remove write-protected regular file 'B-wing'?

You must type either y or n to answer the prompt and allow the rm command to proceed. If you use the force option, rm will not prompt you and will immediately delete the file:

[alan@workstation ~]$ rm -f B-wing
[alan@workstation ~]$ ls -l
total 0
[alan@workstation ~]$

The most common use of force with rm is to delete a directory. The -r (recursive) option tells rm to remove a directory. When combined with the force option, it will remove the directory and all its contents without prompting.

The rm command with certain options can be disastrous. Over the years, online forums have filled with jokes and horror stories of users completely wiping their systems. This notorious usage is rm -rf *. This will immediately delete all files and directories without any prompt wherever it is used.

userdel

The userdel command is short for user delete, which will delete a user. The man page describes the force option for userdel as:

-f, --force
    This option forces the removal of the user account, even if the
    user is still logged in. It also forces userdel to remove the
    user's home directory and mail spool, even if another user uses
    the same home directory or if the mail spool is not owned by the
    specified user. If USERGROUPS_ENAB is defined to yes in
    /etc/login.defs and if a group exists with the same name as the
    deleted user, then this group will be removed, even if it is
    still the primary group of another user.

    Note: This option is dangerous and may leave your system in an
    inconsistent state.

When Obi-Wan reached the castle on Mustafar, he knew what had to be done. He had to delete Darth's user account—but Darth was still logged in.

[root@workstation ~]# ps -fu darth
UID        PID  PPID  C STIME TTY          TIME CMD
darth     7663  7655  0 13:28 pts/3    00:00:00 -bash
[root@workstation ~]# userdel darth
userdel: user darth is currently used by process 7663

Since Darth is currently logged in, Obi-Wan has to use the force option to userdel. This will delete the user account even though it's logged in.

[root@workstation ~]# userdel -f darth
userdel: user darth is currently used by process 7663
[root@workstation ~]# finger darth
finger: darth: no such user.
[root@workstation ~]# ps -fu darth
error: user name does not exist

As you can see, the finger and ps commands confirm the user Darth has been deleted.

Using force in shell scripts

Many other commands have a force option. One place force is very useful is in shell scripts. Since we use scripts in cron jobs and other automated operations, avoiding any prompts is crucial, or else these automated processes will not complete.

I hope the four examples I shared above help you understand how certain circumstances may require the use of force. You should have a strong understanding of the force option when used at the command line or in creating automation scripts. It's misuse can have devastating effects—sometimes across your infrastructure, and not only on a single machine.

Alan Formy-Duval Opensource.com Correspondent
Alan has 20 years of IT experience, mostly in the Government and Financial sectors. He started as a Value Added Reseller before moving into Systems Engineering. Alan's background is in high-availability clustered apps. He wrote the 'Users and Groups' and 'Apache and the Web Stack' chapters in the Oracle Press/McGraw Hill 'Oracle Solaris 11 System Administration' book.

4 Comments

I really like your article! Use the force wisely. :)

It is really good to know about such options in almost every basic tool. But the is one more serious drawback in case if you need to use such an option. If you do then it means that you have missed something before. And I would recommend to learn how to avoid such situations in first place.

Creative Commons LicenseThis work is licensed under a Creative Commons Attribution-Share Alike 4.0 International License.