Make your own open hardware guitar amplifier

How to build an open hardware guitar amplifier in 5 steps

Posted 06 Jan 2016 by 

up
60 readers like this
Image by : 

opensource.com

ElectroSmash just released an open hardware guitar amplifier called the 1Wamp. Designed as a small and portable 1 watt amplifier loaded with all the features of big amps, the project was fully developed using only open source tools—like KiCAD, a design suite to create schematics and layouts in any platform.

 

1wamp-intro-big.jpg

Photo by Ray Rodriguez, CC BY-SA 4.0

We published a detailed analysis of each part of the amplifier so that anyone can contribute to improving or modifying it, as well as, sharing their thoughts and work on the 1Wamp forum.

The amplifier features:

  • Tone/Volume/Gain controls
  • Speaker/Cabinet output
  • Headphones output with attenuator switch
  • Aux/mp3 input
  • 9V battery clip
  • 9V DC boss style power input jack

 

1wamp-functions-big.jpg

 Photo by Ray Rodriguez, CC BY-SA 4.0

How to build 1Wamp in 5 steps

Here's a summarized version from our full documentation.

Step 0

You will need a soldering iron, lead, and cutting pliers. You can get the PCB from ElectroSmash, or build your own at home using the native files or PCB layout transfers from the forum.

 

1wamp-start-big.jpg

 Photo by Ray Rodriguez, CC BY-SA 4.0

Steps 1, 2, 3, and 4

Soldering the components to the PCB is easy; just follow the Bill of Materials and solder the parts, beginning with the small ones. Then put the larger components in place.                                                       

Some tips:

  1. Pay attention to diodes polarity, there's a line indicating the correct position.
  2. Be careful with the electrolytic caps polarity, the negative lead (the short one) has to be placed in the round hole. The positive hole is always square-shaped and it is marked with a "+" symbol.
  3. Be patient soldering the big components perpendicularly, because they tend to be slightly tilted.

Step 5

It's time to check your work. Double-check your PCB with the model, component by component, before powering it up. Use this checklist:

  • Visual inspection of the PCB bottom, there is no short circuits or long uncut leads.
  • The polarized components are placed correctly: diodes and electrolytic caps.

The circuit board fits into several enclosures (like the Hammond 1590B and 1591C), and the plastic cover can also be used as lighting plate.

 

1wamp-enclosure.jpg

 Photo by Ray Rodriguez, CC BY-SA 4.0

You'll find all the schematics here, and the parts list here. All the native files are open.

Watch the two minute video to see this guitar mini amplifier in action!

4 Comments

bmaynard

Now that is cool!. I have a few friends that build their own tube amps and stuff but to see this on here is actually pretty coll. Thanks JR for the great article.

Vote up!
1
Vote down!
0
Tom2015

Be careful with this 1w into a set of headphones can lead to serious hearing loss.

Vote up!
0
Vote down!
0
Loin

I saw an attenuator circuit to avoid the 1W into headphones, although some headbangers will remove it :)
The article is full of detailed information, thanks for making it open hardware!!!!

Vote up!
0
Vote down!
0
clhermansen

A great article, thanks!

Not so much related to guitar amps, but the Burning Amp festival is an open source audio event I have always admired, up to this point from afar, but one day...

http://www.burningamp.org/

Vote up!
0
Vote down!
0

JR is editor of electrosmash, a site focused in electric guitar pedals, amplifiers and audio chips. He is crazy about the technology behind vintage and old fashioned guitar gear and the possibilities of using modern electronic approaches in this field.